Sail Numbers - Laser Class, Sail Numbers

RC LASER CLASS SAIL NUMBERS

The RC Laser NA class has adopted a new registration and sail numbering system. These numbers and country designators are designed especially for the RC Laser and Windjammin Sails has been approved as an official RC Laser Class Association distributor of sail numbers.

Two Digit Number - Each new boat is issued a hull number with the boat, the last two digits of the hull number becomes the sail number. All numbers are issued in sequence.

Boats numbered before 2/01/04, may continue to use sail numbers with more than two digits if the owner wishes, however new class racing rules require two digits only. Note: 4 digit sail numbers are difficult to fit on
C and D sails.

Size and Font - Sail numbers must be a certain size and font. Sail number size: 4” Font: Arial Rounded MT Bold Color: Black Country Designator size: 2-1/2” Font: Arial Rounded MT Bold Color: Black All Windjammin sail numbers and country designators are made from Dacron ® Insignia cloth, commonly called "Sticky Back" or "Dac-Tac", the same number and reinforcement material used on big boat sails. The RC Laser class symbols come on the sail from the manufacturer.

Unlike vinyl number that are stiff and can shrink, insignia cloth is a very soft, flexible number material that does not shrink or fade in the sun over time.

Price below is numbers for both sides of the sail plus $1.00+ some change processing & shipping fee. To order more than 1 set, change the Qty after you add to cart.

Sail Numbers? (Arial Rounded MT Bold 4"+$1.00 each #)

The Number on main is

Which is how many digits long? Total # of digits (1 side of sail) :

(Count one side of sail as program will x2 for total $)
Example: If you wanted your sail number to be 74,
then total # digits above is 2
My Order form will double the number above for the other side of the sail
and you will receive 74, 74 enough for both sides of the sail.

Laser Country Designator: (Arial Rounded MT Bold 2.5")

I would like the 3 letter country designator..(both sides of sail)
No Thanks Yes - Add the 3 Letters

Special Instructions:

3" Sail Numbers

Installation - All numbers and letters must be installed on the sail as per the official class diagram. NOTE: the number set on the starboard (right) side of the sail is the higher installation location. C & D sail locations are the same.

Two boats, same number - There may be occasions when two boats compete in the same regatta that have
the same sail number. In this case, one of the boats will be required to add a “1” in front of their sail number.
This digit can be applied using black electrical tape, and may be removed at the end of the regatta.

If you have any questions, please direct to Dave Branning, RC Laser NA class secretary at
laserdave93@yahoo.com
Be sure to join the RC Laser NA Class at www.rclaserna.com to gain all the information about
your boat, the class and share in the excitement of the best RC class in the world