CAUTION: When looking for DF95 sail numbers, DO NOT BUY VINYL NUMBERS!Vinyl number will shrink and fade over time when exposed to the sun, wrinkling your sails over time.These numbers are Insignia cloth number, what the big boats use. Unlike vinyl number that are stiff and can shrink, insignia cloth is a very soft, flexible number material that does not shrink or fade in the sun over time.
Price below is numbers for both sides of the sail plus $1.00 Shipping. To order more than 1 set, change the Qty after you add to cart.
Note: There is a narrower set of sail numbers to fit on C and D sails. Make sure to choose the correct rig size below when ordering.Sail Number: DragonFlite 95 950mm / DF95 Class RC Sailboat numbers shall be applied to the Mainsail and Jib. They shall be a minimum height of 100mm. On the Mainsail they shall be positioned below a line joining Sail Points E-I and above a line joining C-K (see Diagram A). Two or three digits can be used but must be consistent on all rigs. When using two digits, there shall be space in front of a sail number for a numeric prefix. When the sail number is in the range 00 to 09, the initial 0 shall be omitted and the remaining digit positioned to allow space for both a prefix and a suffix. 0 shall not be used as a prefix. . National letters shall be a minimum height of 40mm and positioned on the Mainsail below a line joining Sail Points C-K. National letters are only mandatory for international events. Sail Point A Mainsail B Mainsail C Mainsail D Mainsail A 80mm 80mm 65mm 65mm G 125mm 125mm 100mm 100mm L 140mm 140mm 120mm 100mm Sail Point A Jib B Jib C Jib D Jib A 80mm 80mm 80mm 60mm C 80mm 80mm 80mm 80mm E 100mm 100mm 90mm 90mm Table 1Reinforcement Patch Dimensions (Values are maximum radius from appropriate Sail Points) DragonFlite 95, Restricted Class Rules 2016 Version 1.2 All numbers and letters shall be filled in solid, in a strong contrasting colour and arranged for maximum legibility. Guidelines are available on www.dfracing.world Sail numbers, and national letters if fitted, shall be applied to both sides of the sail with port side numbers and letters positioned below starboard side with a clear gap between rows. Sail numbers, and national letters if fitted, shall be applied using either self-adhesive material or ink. H.10 Class Emblem The DF class emblem shall be applied to the Mainsail above a line joining Sail Points E-I using self-adhesive material or ink on one or both sides of the sail. If applied on both sides of the sail, port side shall be below starboard side with a clear gap between them. DF95 logo shall be 70mm wide. A template will available to download from the website www.dfracing.world Nationality letters: (only for international events) The nationality letters will be located in the lower third of the mainsail, starboard above, port side below, with letters clearly visible in contrasting colour, in Arial font, height not less than 4 cm., made with a stroke of not less than 0.4 cm. wide