2018 Nationals 1,2,4
2017 Nationals 1
2016 Nationals 1,3,4,5
2015 Nationals 1,2,4,5
2014 Nationals 1,2,3,4
2013 Nationals 3
2012 Nationals 1,3
2010 Nationals 1,2,3
Click on Photos to Enlarge
for the V32
Windjammin Sails are 100% legal racing sails for the V32. They are made of a single-panel Dacron and cut to comply with the V32 Sail Control Drawing. However, WJ Sails has taken these plain white sails one step further by printing the illusion that these sails incorporate the hottest revolution in sailmaking - membrane technology just like the high tech America's Cup Yachts and Volvo Ocean Racers.
Membrane Technology is where sails are created over full-sized 3-dimensional molds by sandwiching a scrim cloth and a yarn layout between two thin Mylar films, then heat fusing everything to make a single cloth-like sail. The sails have fibers running up the leech, and tack fibers radiate out to the leech and many fibers from the clew radiate to points along the luff creating an interlocking structural grid that stretches less for its weight, holds its shape over a wider wind range, and retains its designed shape longer. This membrane technology has dominated sailboat racing worldwide. Membrane sails were used exclusively by the America's Cup and every team racing in both the 2002-2003 and 2005-2006 Volvo Ocean Race.
Over the past 4 years, WJ Sails has been looking for some way to print on Dacron. Because of the slippery coated finish Dacron has, nothing wanted to adhere to the surface. Graphic for the big cruising boats are currently printed and then cured under 800 degrees of heat. Problem with this process is the cloth shrinks around 8%, and not proportionately making it impossible to get a perfectly legal - lined up sail when done. Just recently WJ Sails found a process which does the job without heat and applies the ink just like a giant inkjet printer, but uses a special UV light to cure it.
So, WJ Sails took lots of pictures of different scrim mylars for the background, then drew to scale all the thread lines coming out of each corner of the sails, overlay some graphics, and after about 30 hours of design work, now have a very realistic 3DL America's Cup Volvo Ocean Racer looking Sail for the V32.
- Reinforced starburst corners which distribute the stretch and load better yielding a smoother longer lasting sail.
- Battens which help hold the leech and keeps the sail area outside the pull line supported
- Tell Tales in Florescent Green and Yellow, 2 pair on the jib, 1 pair on the main and 2 on main leech
- V32 Symbol both sides of the sail
- Luff wire installed in jib
- Sail Numbers included on the main.... jib are extra.
Unfortunately... with Thanksgiving and Christmas coming up fast, New Sail Orders are currently taking about 81 days to get shipped out!
New orders will be delivered around 2/20/2022 or as soon as possible in the order received. I greatly apologize for this long lead time, but I work full time for The Sailors' Tailor, then come home to a wife and two boys. I am working as many hours as I can in the evenings to get new orders out, but just so many people have ordered recently... that I am totally booked up. It is only after everyone else goes to bed and on weekends I can make sails... This is a side hobby for me, not my full time business.